Thermoformable wool felt.
Composition: 90% wool, 10% polyester
Thickness: 3 mm - 0.12"
Width: 150 cm - 59"
Weight: 930 g/m - 32.8"
Tolerances
Weight per m: +/- 5%
Thickness: +/- 3%
Our felt is produced using wools which come from both Australia and South America and are carefully selected to ensure constant quality over time. The dyeing is done in our dyeing house in Italy and is Oeko-Tex Standard 100 certified.
Available in packs of 1 m, 5 m, 20 m. The quantities inside these packs are sent as one single piece.
This felt can be used as a traditional felt (cut, sewn, glued) but can also be exploited for its thermoformability.
Felt by the meter is sent folded and bagged (except for the 20 metre packs) to save on volume and shipping costs. The creases are caused by this packaging and are not a product defect; they can easily be ironed out (making sure there is a protective cotton cloth between the material and the iron).
If you would like to receive the felt wrapped around a coreboard please write to info@dhgshop.it. We’ll be more than happy to find a solution to meet your needs! Note: the shipment of rolls can cause additional transport charges.
Roll storage
The rolls must be stored horizzontally to avoid the reduction in height caused by compression.
Since colours can vary depending on your device’s monitor settings, we recommend buying our Colour Chart so that you can check the colours with you own eyes before proceeding with the final order.Do you want to check the quality of the material? Buy our Quality Reference.
